User`s guide

Adjusting the Machine
4-54
4
Customizing Settings
Adjusting the Machine
This section describes how you can make fine adjustments to the settings of the machine, such
as making a fine adjustment to the printed image and the saddle stitch position.
It is recommended that you perform an Automatic Gradation Adjustment and clean the machine
regularly.
Zoom Fine Adjustment
When you print a copy or a document from an inbox, a slight difference in size may occur
between the size of the original image, and the size of the copied/printed image. If this happens,
you can perform a fine adjustment to compensate for this difference.
Follow the procedure below to adjust the machine.
1 Press ➞ [Adjustment/Cleaning] ➞ [Zoom Fine Adjustment].
2 Press [-] or [+] to adjust the percentage (%) ➞ press [OK].
The adjustment can be made within the range shown below:
If you are making an adjustment to either the X (horizontal) or Y (vertical) direction, press [-] or
[+] to enter a value for that direction only.
The selected mode is set.
X (horizontal direction): -1.0% to +1.0%, in 0.1% increments
Y (vertical direction): -1.0% to +1.0%, in 0.1% increments