User`s guide

Timer Settings
4-53
4
Customizing Settings
2 Select the day of the week ➞ enter the time using - (numeric keys)
➞ press [OK].
Enter the time in 24-hour notation as four digits (including zeros) without a space.
If you make a mistake when entering the time, select the day of the week again ➞ enter another
four digit number.
You can also press to clear the incorrect values.
The selected mode is set.
Low-Power Mode Time
The Low-Power mode conserves energy by turning the fixing unit OFF when the machine is idle
for a certain period of time (after the last print job or a key operation is performed). This period
of time is called the "Low-Power Mode Time." The touch panel display is turned OFF, and
maintains a steady green light when the machine is in the Low-Power mode.
NOTE
The default setting is '15' minutes.
1 Press ➞ [Timer Settings] ➞ [Low-power Mode Time].
2 Press [ ] or [ ] to enter the desired Low-Power Mode Time ➞ press
[OK].
The Low-power Mode Time can be set from 10, 15, 20, 30, 40, 50 minutes, 1 hour, 90 minutes,
2, 3, and 4 hours.
The selected mode is set.
Examples: 7:05 a.m.
11:18 p.m.
➞ 0705
➞ 2318