User`s guide

Timer Settings
4-52
4
Customizing Settings
Auto Clear Time
If the machine is idle for a certain period of time after the last print job or a key operation is
performed, the display returns to the Basic Features screen (standard settings) of the selected
function. This period of time is called "Auto Clear Time."
NOTE
• If '0' is selected, the Auto Clear Time mode is not set.
• The default setting is '2' minutes.
1 Press ➞ [Timer Settings] ➞ [Auto Clear Time].
2 Press [-] or [+] to enter the desired Auto Clear Time ➞ press [OK].
The Auto Clear Time can be set from 0 to 9 minutes (in one minute increments).
You can also enter values using - (numeric keys).
The selected mode is set.
Daily Timer Settings
You can set the time that the machine automatically enters the Sleep mode each day of the
week.
NOTE
• Setting Range: Daily, from Sunday to Saturday, 00:00 to 23:59 in one minute increments.
• If the Auto Sleep Time and Daily Timer modes are both set, the Auto Sleep Time setting has priority.
• By default, the Daily Timer Settings are not set.
1 Press ➞ [Timer Settings] ➞ [Daily Timer Settings].