User`s guide

Timer Settings
4-51
4
Customizing Settings
Timer Settings
You can make various timer related settings for the machine, such as adjusting the current time,
and specifying the time it takes for the machine to enter into the Sleep mode or Low-Power
mode.
Current Time Adjustment
You can make adjustments to the current time. For instructions on setting the current date and
time, see "Current Data and Time," on p. 6-29.
1 Press ➞ [Timer Settings] ➞ [Time Fine Adjustment].
2 Press [-] or [+] to adjust the current time ➞ press [OK].
The current time can be adjusted in one minute increments.
Auto Sleep Time
If the machine is idle for a certain period of time after the last print job or a key operation is
performed, the control panel power switch automatically switches OFF to save power. The
machine has entered the Sleep mode.
NOTE
The default setting is '1' hour.
1 Press ➞ [Timer Settings] ➞ [Auto Sleep Time].
2 Press [ ] or [ ] to enter the desired Auto Sleep Time ➞ press [OK].
The Auto Sleep Time can be set from 10, 15, 20, 30, 40, 50 minutes, 1 hour, 90 minutes, 2, 3,
and 4 hours.
The selected mode is set.