User`s guide

Specifying Common Settings
4-49
4
Customizing Settings
Data Compression Ratio for Remote Scans
You can specify the compression ratio for remote scanning. Setting a high compression ratio
reduces the amount of memory used for scanning document, but also decreases the image
quality.
Meanwhile, a lower compression ratio increases the amount of memory required but maintains
a high image quality.
NOTE
• [Data Compression Ratio for Remote Scans] is available only if the optional Color Image Reader-C1
and the remote scanning function is installed.
• For more information on the remote scanning function, see the Color Network ScanGear User's Guide.
• The default setting is 'Normal'.
1 Press ➞ [Common Settings] ➞ [Data Compression Ratio for Remote
Scans].
2 Select [High Ratio], [Normal], or [Low Ratio] ➞ press [OK].
Details of each item are shown below.
The selected mode is set.
[High Ratio]: A small amount of memory is used for scanning the document, but the images
have a lower image quality.
[Normal]: The amount of memory used for scanning the document and the quality of the
images are moderate, between the High Ratio and Low Ratio setting.
[Low Ratio]: A large amount of memory is used for scanning the document, but the images
have a higher image quality.