User`s guide

Specifying Common Settings
4-48
4
Customizing Settings
Reversing the Contrast of the Touch Panel Display
You can reverse the contrast on the touch panel display for better viewing. The Reversed
Display mode reverses the light and dark areas on the touch panel display. If you find it hard to
read what is being shown on the touch panel display, try using this mode.
NOTE
The default setting is 'Off'.
1 Press ➞ [Common Settings] ➞ [Reversed Display (Color)].
2 Select [On] or [Off] ➞ press [OK].
Details of each item are shown below.
The touch panel display's contrast changes.
Alternating the Print Output (Offset Jobs)
The Offset Jobs mode automatically sorts the print output by job when multiple print jobs are
specified. This feature makes sure that output pages are always sorted even if you forget to
specify a finishing mode.
NOTE
• [Offset Jobs] is displayed only if an optional finisher is attached.
• The default setting is 'On'.
1 Press ➞ [Common Settings] ➞ [Offset Jobs].
2 Select [On] or [Off] ➞ press [OK].
The selected mode is set.
[On]: The colours of the touch panel display screen are reversed (i.e., the areas that are
normally light become dark, and the dark areas become light).
[Off]: The touch panel display screen returns to its default colours.