User`s guide

Specifying Common Settings
4-47
4
Customizing Settings
Changing the Language Shown on the Touch Panel
Display
You can select the language displayed on the touch panel display.
NOTE
• If Language Switch is set to 'On', some characters are restricted and cannot be entered. To be able to
enter all characters, set Language Switch to 'Off'.
• Even if Language Switch is set to 'On', there are some languages that cannot be displayed.
• If Language Switch is set to 'On', you can also change the language shown on the Remote UI. (See
Chapter 3, "Customizing Settings," in the Remote UI Guide.)
• The default setting is 'Off'.
1 Press ➞ [Common Settings] ➞ [Language Switch].
2 Press [On] ➞ select the desired language ➞ press [OK].
If you do not want to change the display language, press [Off].
The selected mode is set.
IMPORTANT
• Some messages may not be displayed properly in the language that you just selected. If this
happens, restart the machine (turn the machine OFF, then back ON again).
• If SSO is set as the login service, and there is a difference between the language set on the
machine and the one set on the Active Directory, the sender's Full name is not displayed on the
e-mail recipient's machine.