User`s guide

Specifying Common Settings
4-42
4
Customizing Settings
3 Enter the size of the paper using the numeric keys on the touch panel
display.
❑
Press [X] ➞ enter a value.
❑ Press [Y] ➞ enter a value.
❑ Press [OK].
You can also use - (numeric keys), and to clear your entries.
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
The contents you have stored appear on the display.
NOTE
• To enter values in inches, press [Inch]. You must first specify to set Inch Entry in Common
Settings (from the Additional Functions screen) to 'On'. (See "Inch Entry," on p. 4-22.)
• For instructions on how to enter values in inches, see "Values in Inches," on p. 2-32.
• If you make a mistake when entering values, press [C] on the touch panel display ➞ enter the
correct values.
Naming a Size Key
1 Press ➞ [Common Settings] ➞ [Registering Irregular Size for Stack
Bypass].