User`s guide

Specifying Common Settings
4-29
4
Customizing Settings
Energy Consumption in the Sleep Mode
You can set the amount of energy that the machine consumes when it is in the Sleep mode.
NOTE
• In some cases, the energy consumption level in the Sleep mode is 'High' even when the energy
consumption level is set to 'Low' when:
- A job is being processed (including a forwarding job, report job, receive job, and sending a forwarding
done notice).
- The optional USB board is installed.
- The optional Token Ring board is installed.
- The optional Color Network Printer Unit is installed.
- Any of the following settings are set from the Additional Function screen:
For details on the above settings, see the Sending and Facsimile Guide, Network Guide, or PS/PCL/
UFR Printer Guide.
• The default setting is 'Low'.
Report Settings
Settings Send The Daily Activity Report Time setting for
the Activity Report is set to 'On'.
Fax The Daily Activity Report Time setting for
the FAX Activity Report is set to 'On'.
System Settings
Communications Settings Memory RX Inbox
Settings
Time limit for receiving fax documents in
memory is set.
Network Settings TCP/IP Settings DHCP is set to 'On'.
NetWare Settings NetWare is set to 'On'.
AppleTalk Settings AppleTalk is set to 'On'.
SMB Settings SMB is set to 'On'.
E-Mail/I-Fax The POP Interval setting is set to more
than '1' minute.