User`s guide

Specifying Common Settings
4-25
4
Customizing Settings
NOTE
• Regardless of the stack bypass setting, you cannot select 'Off' for all of the paper sources at the
same time. At least one of the paper sources, besides the stack bypass must be set to 'On'.
• The settings under [Copy] include an option called [Consider Paper Type], which determines
whether the machine considers the paper type loaded in a paper source.
- If [Consider Paper Type] is set to 'On', paper is not fed from another paper source when the
original paper source runs out of paper, unless another paper source is loaded with the same
paper size and type. For more information on stored paper types, see "Identifying the Type of
Paper in a Paper Source," on p. 4-25.
- If [Consider Paper Type] is set to 'Off', paper is fed from another paper source when paper in
the current paper source runs out, as long as the same paper size is loaded in that paper
source.
• If you selected [Printer] in step 3, the Stack Bypass icon ( ) will not be displayed on the paper
selection screen in step 3.
Identifying the Type of Paper in a Paper Source
This setting enables you to specify the paper type loaded in each paper source.
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could
jam, and a service repair may be needed.
1 Press ➞ [Common Settings] ➞ [Register Paper Type].