User`s guide

Specifying Common Settings
4-23
4
Customizing Settings
1 Press ➞ [Common Settings] ➞ [Inch Entry].
2 Select [On] or [Off] ➞ press [OK].
The selected mode is set.
Auto Paper Selection/Auto Drawer Switching
You can set which paper sources can be used for Automatic Paper Selection and Auto Drawer
Switching. This setting can be made independently for all the different functions of the machine,
and is especially useful when you want to use different paper sources for different purposes.
NOTE
• Paper sources set to 'On' are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the appropriate paper size (paper
source).
- ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous print job, the
machine automatically selects another paper source with the same paper size, and begins feeding
paper from that paper source.
• The default settings are 'Off' for the stack bypass, and 'On' for the other paper sources.
1 Press ➞ [Common Settings] ➞ [Drawer Eligibility For APS/ADS].
2 Select [Copy], [Printer], [Mail Box], [Receive/Fax], or [Other].
[Copy] appears only if the optional Color Image Reader-C1 is attached.
[Printer] appears only if the optional Printer function is installed.
[Receive/Fax] appears only if the optional Color Image Reader-C1, Color Universal Send Kit,
Super G3 FAX Board, and Resolution Switching Board are installed. If only the optional Color
Image Reader-C1, Color Universal Send Kit, and Resolution Switching Board are installed,
[Receive] is displayed. If only the optional Color Image Reader-C1, Super G3 FAX Board, and
Resolution Switching Board are installed, [Fax] is displayed.
NOTE
[Other] is used for specifying the paper source for printing reports.