User`s guide

Specifying Common Settings
4-22
4
Customizing Settings
Text/Photo Priority in a Black-and-White Original
You can set whether priority is given to text or photographic images when the Automatic Colour
Selection mode detects that the original is in black-and-white.
Give priority to text when printing or making copies of originals with fine and faint characters.
When printing or making copies of originals with photos that you prefer to reproduce with a
sharper contrast, set the photo priority higher.
NOTE
• [Text/phot priority when ACS is set to Black] is displayed only if the optional Color Image Reader-C1 is
attached.
• The default setting is 'Photo Priority'.
1 Press ➞ [Common Settings] ➞ [Text/photo priority when ACS is set
to Black].
2 Select [Text Priority] or [Photo Priority] ➞ press [OK].
Details of each item are shown below.
The selected mode is set.
NOTE
If you select [Text Priority] and the Automatic Colour Selection mode detects that the original is in
black-and-white, the original is processed as if [Text] is selected as the original type setting even
if you select [Text/Photo/Map] as the original type setting.
Inch Entry
Specifying this setting ensures that the key for entering values in inches is displayed on the
various numeric entry screens.
NOTE
• Even if Inch Entry is set to 'On', you still have the option to enter measurements in millimetres by
pressing [mm] on the various numeric entry screens.
• The default setting is 'Off'.
[Text Priority]: The job is processed by giving priority to the text elements on the original.
[Photo Priority]: The job is processed by giving priority to the photographic elements on the
original.