User`s guide

Specifying Common Settings
4-18
4
Customizing Settings
If the optional Color Image Reader-C1 is not attached, [Mail Box] is selected as the initial
function.
[Copy] appears only if the optional Color Image Reader-C1 is attached.
[Send] appears only if the optional Color Image Reader-C1, Color Universal Send Kit, Super
G3 FAX Board, and Resolution Switching Board are installed, or only if the optional Color
Image Reader-C1, Color Universal Send Kit, and Resolution Switching Board are installed.
[Fax] appears only if the optional Color Image Reader-C1, Super G3 FAX Board, and
Resolution Switching Board are installed.
When the main power is turned ON or after the Auto Clear mode initiates:
If you select [Copy]: The Copy Basic Features screen appears.
If you select [Send]: The Send Basic Features screen appears.
If you select [Fax]: The Fax Basic Features screen appears.
If you select [Mail Box]: The Inbox Selection screen appears.
If you select [MEAP]: The MEAP application screen appears. (If no MEAP application is
installed, a message telling you that there is no MEAP application installed appears.)
● If you want to set the System Monitor screen as the initial function screen:
❑ Select [On] for <Set [System Monitor] as the Initial Function> ➞ press [OK].
The System Monitor screen is displayed when the main power is turned ON, or after the
Auto Clear mode initiates.
NOTE
• If you do not want to set the Device status screen as the default screen when you press [System
Monitor], press [Off] under <Set [Device] as the default screen for [System Monitor]>. If you
select [Off], the following screen is displayed by default when you press [System Monitor].
- If the optional Color Image Reader-C1 is attached: 'Copy'
- If the optional Color Image Reader-C1 is not attached: 'Print'
• If you select [MEAP], it takes longer to start the machine.
The selected mode is set.
Default Display after Auto Clear
You can set whether the screen specified as the Initial Function is displayed after Auto Clear
initiates.
NOTE
• The time necessary for Auto Clear to initiate can be set. (See "Auto Clear Time," on p. 4-52.)
• The default setting is 'Initial Function'.