User`s guide

Card Reader-D1
3-27
3
Optional Equipment
IMPORTANT
• Once you have removed the control card, you cannot operate the machine until the control card
is inserted again.
• The control card must remain inserted to make copies with the Auto Start function, until copying
is complete.
Department ID Management
This section describes how to change the password and page limit, and how to check the print
totals when the control card is being used.
NOTE
• The maximum number of digits that you can register for the password is seven. If you enter fewer than
seven digits, the machine registers the password with leading zeros.
- Example: If <321> is entered, then <0000321> is registered.
• You can set the page limit from 0 to 999,999 pages.
Flow of Additional Functions Operations
This section describes the flow of Additional Functions operations when the optional Card
Reader-D1 is attached.
NOTE
Settings specified from the Additional Functions screen are never changed when you press .
1 Press ➞ [System Settings].
If the System Manager ID and System Password have been set, enter the System Manager ID
and System Password using - (numeric keys) ➞ press .