User`s guide

Finisher-N1/Saddle Finisher-N2
3-22
3
Optional Equipment
IMPORTANT
• The Saddle Stitch mode is available only if the Saddle Finisher-N2 is attached.
• The maximum number of sheets that can be saddle stitched is as following:
- 15 sheets (64 to 80 g/m
2
)
- 10 sheets (81 to 105 g/m
2
)
• The paper sizes that can be saddle stitched are: A3 or A4R.
• The accuracy of folds created in the Saddle Stitch mode may vary depending on the paper type and the
number of sheets.
• Make sure to adjust the Booklet Tray Guide to match the size of the output paper before outputting
saddle stitched prints, as shown below.
• A paper jam may occur if the Booklet Tray Guide is not adjusted to match the size of the output paper.