User`s guide

Finisher-N1/Saddle Finisher-N2
3-20
3
Optional Equipment
CAUTION
Do not place your hand in the part of the tray where stapling is performed if a finisher is
attached, as this may result in personal injury.
IMPORTANT
• If the Staple mode is set, the output trays move downward as the stack of paper that is output increases
in quantity and thickness. Once an output tray has reached its stacking limit, or after 30 sets of prints
have been output, printing and stapling stop temporarily. Remove all of the stapled prints from the
output tray, and printing and stapling resume.
• You cannot corner staples or double staple A5 or A5R paper.
• You cannot double staple A4R paper.
• You cannot staple envelopes, glossy paper, transparencies, tracing paper, labels, tab paper, or
Japanese paper.
• Do not pull copies or prints out of the output area while they are being stapled. Remove the copies or
prints after they are output to one of the output trays.