User`s guide

System Configuration
3-3
3
Optional Equipment
a Copy Tray Unit-H1
The Copy Tray Unit-H1 is equipped with the following
features: Collate, Group, and Rotate.
b Finisher-M1
The Finisher-M1 is equipped with the following features:
Collate, Group, and Staple (Corner).
c Saddle Finisher-N2
The Saddle Finisher-N2 is equipped with the following
features: Collate, Group, and Staple (Corner, Double, and
Saddle Stitch).
d Finisher-N1
The Finisher-N1 is equipped with the following features:
Collate, Group, and Staple (Corner and Double).
e Feeder (DADF-K1)
Originals placed in the feeder are automatically fed sheet
by sheet onto the platen glass for copying. The feeder also
automatically turns over the originals to make copies of
two-sided originals.
f Platen Cover Type G
The Platen Cover Type G secures the originals placed on
the platen glass.
g Color Image Reader-C1
The Color Image Reader-C1 enables the machine to scan
and read images for copying.
h Card Reader-D1
The Card Reader-D1 enables Department ID Management
to be performed automatically.
i Cassette Feeding Unit-X1
The Cassette Feeding Unit-X1 provides two additional
sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of paper (80 g/
m
2
).
j Plain Pedestal-C1
Use the Plain Pedestal-C1 only when the Paper Deck-P1 or
one of the finishers are attached, and when the Cassette
Feeding Unit-X1 is not attached. This pedestal serves as an
electrical outlet for the finishers and the paper deck. You
can also use the pedestal as a means to adjust the height
of the machine.
k Paper Deck-P1
The Paper Deck-P1 provides an additional source of paper
for printing jobs.
The Paper Deck-P1 holds up to 2,700 sheets of paper (80
g/m
2
).