User`s guide

Making Prints Using the Stack Bypass
2-60
2
Basic Operations
5 Select the desired paper type ➞ press [OK].
If you are printing onto the back side of a previously printed sheet, press [2nd Side of 2-Sided
Page].
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become
dirty, or the paper could jam, and a service repair may be needed.
NOTE
• [Transparency] can be selected only if [A4] is selected as the paper size.
• For more information on paper types, see "Available Paper Stock," on p. 2-64.
6 Press [Done].
If you press [Stack Bypass Settings], follow the procedures and screens in steps 4 and 5 to
reset the paper size and type settings.