User`s guide

Making Prints Using the Stack Bypass
2-59
2
Basic Operations
IMPORTANT
If the envelope type is not selected correctly, a paper jam will occur.
❑ Press [OK] ➞ proceed to step 6.
If the following screen is displayed, adjust the width of the slide guides ➞ specify the
envelope size ➞ press [OK].
If the following screen is displayed, adjust the width of the slide guides to match the paper or
envelope size stored in Stack Bypass Standard Settings, or set Stack Bypass Standard
Settings to 'Off' in Common Settings (from the Additional Functions screen). (See "Standard
Paper for the Stack Bypass," on p. 4-36.)
IMPORTANT
Set the paper or envelope size to the same size as the paper or envelopes loaded in the stack
bypass.