User`s guide

Making Prints Using the Stack Bypass
2-58
2
Basic Operations
NOTE
• To enter values in inches, press [Inch]. You must first specify to set Inch Entry in Common
Settings (from the Additional Functions screen) to 'On'. (See "Inch Entry," on p. 4-22.)
• For instructions on entering values in inches, see "Values in Inches," on p. 2-32.
• If you make a mistake when entering values, press [C] on the touch panel display ➞ enter the
correct values.
• To select a paper size stored in a size key ( [S1] to [S5] ), you need to store the irregular paper
size in the size key beforehand. For instructions on storing irregular paper sizes, see "Irregular
Paper Size Settings for the Stack Bypass," on p. 4-41.
• The Register button is a shortcut key to the Registering Irregular Size for Stack Bypass mode in
Common Settings (from the Additional Functions screen).
❑ Press [Next].
● If you want to select an envelope size:
❑ Press [Envelope].
❑ Select the envelope type ➞ press [OK].
The display returns to the paper size selection screen.