User`s guide

Making Prints Using the Stack Bypass
2-53
2
Basic Operations
NOTE
• If there are instructions on the paper package about which side of the paper to load, follow those
instructions.
• When the paper is loaded into the stack bypass, the side facing up is the one printed on.
• If problems, such as poor print quality or paper jams occur, try turning the paper stack over and
reload it.
• For more information on the print direction of preprinted paper (paper which has logos or
patterns already printed on it), see "Relationship between Original Orientation and Preprinted
Paper Output Chart," on p. 9-19.
● If you are loading tab paper into the stack bypass:
❑ Load the tab paper into the stack bypass, as shown below.
IMPORTANT
• Make sure that the side to be printed on is placed face up.
• Make sure that the first sheet of tab paper to be printed on is placed on the top.
● If you are loading envelopes into the stack bypass:
❑ Take five envelopes, loosen them as shown, and stack them together. Repeat this step five
times for each set of five envelopes.