User`s guide

Placing Originals
2-46
2
Basic Operations
Feeder (DADF-K1)
You should use the feeder when you want to scan/copy several originals at the same time.
Place the originals in the feeder and press . The machine automatically feeds the originals
onto the platen glass and scans them. Two-sided originals can also be automatically turned
over and scanned as two-sided documents.
You can place the following originals in the feeder's original supply tray:
IMPORTANT
• Thin originals may become creased, if used in a high-temperature or high-humidity environment.
• Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
• If the same original is fed through the feeder repeatedly, the original may fold or become creased, and
make feeding impossible. Limit repeated feeding to a maximum of 30 times (this number varies,
depending on the type and quality of the original).
• If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder cleaning
procedure. (See "Automatic Feeder Cleaning," on p. 7-43.)
• Always smooth out any folds in your originals before placing them in the feeder.
Weight:
52 to 105 g/m
2
Size: A3, A4, A4R, or A5
Tray Capacity:
- A3:
15 sheets (80 g/m
2
)
- A4 or A5:
30 sheets (80 g/m
2
)