Service manual

b. Installation Procedures
● Connecting the printer as a local printer
This section describes how to install CAPT for using the printer as a local printer. Install it to
the host computer by following the procedures below.
For details, see the User’s Manual packed with the printer.
1. Switch on the computer to which the printer is connected and start up Microsoft Windows
NT.
2. Log in as an Administrator.
3. Use one of the following methods to start up the Add Printer Wizard.
• Start button / Settings / Printers / Printers folder / Open the Add Printer.
• My Computer / Printers folder / Open the Add Printer.
• Explorer / Desktop / My Computer / Printers / Open the Add Printer.
4. Add Printer Wizard (Initial screen)
Select either to use this printer, as a local printer or network printer. The following proce-
dures describe the installation for using the printer as a local printer by selecting the My
Computer. For using the printer as a network printer, see Page 1-14 for details.
5. Add Printer Wizard (Port selection)
Select the port to which the printer is connected. If the port is not available, click the Add
Port button to create a new port.
If the check box for Enable printer pooling is selected, you can select multiple ports in the
Available ports list box simultaneously.
6. Add Printer Wizard (Printer selection 1)
Insert the CD-ROM into the computer, click the Have Disk button to open the Install From
Disk dialog box.
Enter the name of the CD-ROM drive in the Copy manufacture’s files from text box, and then
click the Browse button.
7. Add Printer Wizard (Printer selection 2)
If the name of the printer appears in the Printers list box, and the printer you are installing
is selected, click the Next button. If you want to change the printer, click the Have Disk but-
ton to reselect the INF file.
8. Add Printer (Overwrite selection)
This windows appears only when the same driver has already been installed.
Select whether or not the existing driver is to be overwritten by the newly installed driver.
9. Add Printer Wizard (Printer name change)
Enter the printer name to the Printer Name text box. Select whether or not the printer is to
be a default printer.
10. Add Printer Wizard (Sharing/non-sharing selection)
Select whether or not the PC is to be designated as the print server and the printer is to be
shared by other client PCs on a network. You can also specifies the printer sharing settings
after installing CAPT.
11. Add Printer Wizard (Test page printing selection)
Select whether or not to print a test page after you have finished installing CAPT.
12. Coping Files
The Coping Files dialog box appears when the installation has been started.
13. End of Installation
When the installation has completed, restart Microsoft Windows as instructed by the on-
screen message. When the printer is connected, you will be asked whether you want to print
a test page. Print a test page to confirm that the installation has been made properly.
CHAPTER 1
1 - 13