Service manual

D. Delivery Unit
1) Open the cartridge cover unit.
2) Pressing the claw, remove the face-
down delivery roller holder, and then
slide the face-down delivery roller to the
right to remove.
➀ Claw
➁ Face-down delivery roller holder
➂ Face-down delivery roller
Figure 3-3-11
3) Remove the 2 screws. Then, slide the
delivery unit to the right to remove.
➀ Screws ➁ Delivery unit
Figure 3-3-12
E. Fixing Film Unit
1) Remove the external covers.
2) Remove the delivery unit.
3) Make sure that the pressure release
lever is up. Slide the right and left fixing
pressure units inward by pushing down
on them.
➀ Pressure release lever
➁ Fixing pressure units
Figure 3-3-13
4) Disconnect the connector.
➀ Connector
Figure 3-3-14
CHAPTER 3
3 - 8
➀
➀
➁
➂
➁
➀
➀
➁