Service manual

7) Disconnect the 2 connectors and
remove the 4 screws. Remove the cable
from the cable guides and then the
laser/scanner unit.
Figure 3-3-5
➀ Connectors
➁ Cable guides
➂ Cable
➃ Screws
➄ Laser/scanner unit
Note: Do not disassemble the laser/scan-
ner unit, as it cannot be adjusted
in the field.
B. Drive Unit
1) Remove the external covers.
2) Disconnect the connector from the back
of the printer.
Figure 3-3-6
➀ Connector
3) Remove the 4 screws and then the drive
unit.
➀ Screws ➁ Drive unit
Figure 3-3-7
CHAPTER 3
3 - 6
➁
➀
➂
➀
➄
➃
➃
➁
➀