User guide

* If you use a PC card reader or a notebook type PC with a PC card slot, a
CF-to-PC card adapter is required.
(B) IF YOU DO NOT HAVE ANY OF THE ABOVE CARD READING DEVICES
1. Insert the CF card into the PowerShot G2, and connect it to the PC with an USB cable.
2. Double-click the " " in the "G2_FirmUpdate1100" folder, and follow the
instructions so that the "PS_G2.FIR" file can be copied onto the CF card in the PowerShot G2*.
UploadFirmware
* The Main Dial of the PowerShot G2 should be set to (Replay) mode
while the PC is connected.
When you attempt to transfer the data to the CF card in the PowerShot G2
with the "UploadFirmware", do not open the CF card slot cover, turn the Main
Dial or turn the power off until the data transfer is completed.
Any of the above operations during data transfer will disable the firmware
update.