Service manual
Table Of Contents
- CANOSCAN 9900F
- Chp.1: General Descriptions
- Chp.2: Operation and Timing
- Chp.3: Mechanical System
- Chp.4: Maintenance and Servicing
- Chp.5: Troubleshooting
- Service Manual Menu
- Main Menu
CHAPTER 3
3 - 17
COPYRIGHT
2003 CANON INC. CANOSCAN 9900F REV.0 FEB. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
5) Remove two screws that hold the gear plate 2 . Remove spring from the gear plate 2.
6) Remove screw that holds grounding.
q Grounding Cable
w Screw
e Spring
r Gear Plate 2
Figure 3-16
Note: When installing the gear plate 2, adjust the tension of the timing belt by spring
hooked on the gear plate. Then fasten the gear plate on the sliding rod with screws.
1
2
3
4