Service manual

R5
2-2 Procedure
The following flowchart shows the procedure for disassembling the PowerShot G1.
To assemble, follow the procedure in reverse. *( ) : denotes the page to be referenced.
2 Disassembly and Assembly
2-1 Required Tools
[Relations among Line-Connected Units]
1.To disassemble the lower unit, disassemble the upper unit.
2.The paralleled units can be removed arbitrary without order.
DESCRIPTION
Screwdriver
Tweezers
Soldering iron
Solder
Steel wire
ADHESIVE TAPE
(ADHESIVE TAPE, SONY T4000)
DIA BOND NO.1663
(BOND, DIA BOND NO. 1663 BLACK)
CEMEDINE SUPER X
(BOND,CEMEDINE SUPER X BLACK)
THREE BOND 1401C
(BOND,THREE BOND 1401C )
LOGENEST RAMBDA A-74
(LUBE,LOGENEST RAMBDA A-74 )
PARTS NO.
CY4-6012-000
DY9-3008-000
CY9-8118-000
CY9-8011-000
CY9-8102-000
REMARKS
Local Purchase
Local Purchase
Local Purchase
Local Purchase
Local Purchase
Refer to R16, R43, R45, R48, R49
Refer to R32, R33, R37, R45, R46
Refer to R47
Refer to R37
Refer to R34, R52