Service manual

G35
<AE Lock/FE Lock (Enabled in all Creative Zone except for M, at EVF only.)>
-Set the Mode Dial to a Creative Zone mode.
-AE lock takes effect at SW1 or when the AE lock/FE Lock button is pressed while there is no other camera operation. FE
is locked in Flash mode is set.
-During AE lock, the image is captured at SW1 and SW2.
< Spot metering (Creative Zone modes only.)>
-Set the Mode Dial to a Creative Zone mode.
-The spot metering button toggles between spot metering and center-weighted averaging metering. Set it to spot metering.
<Video/Audio Out>
-In shooting modes other than Stitch Assist, the EVF output can be switched to the A/V Out. The EVF signal is output to
Video Output when the video jack is connected.
<Rec. Menu>
-In shooting mode, press the MENU button to display the Rec Menu.
-Press the Omni Selector to select the item to be set. The following items can be set:
-Resolution (Large [Default]/Middle/Small)
-Compression (Super Fine/Fine [Default]/Normal)
-File Format (RAW/JPEG[Default])
-ISO speed (50 [Default]/100/200/400/Auto)
-Digital Zoom (OFF [Default]/2X/4X)
-AF Mode (SINGLE/CONT[Default])
-Review (OFF/2 sec.[Default]/10 sec.)
-File No. reset (ON/OFF [Default])
-Contrast (-/0[Default]/+)
-Sharpness (-/0[Default]/+)
-Saturation (-/0[Default]/+)
-For each item, press the Omni Selector to make the selection, then press SET button to set it.
-Press the MENU button to exit.
<Setting MENU (Shooting/Playback)>
-Press the MENU button to display the Setting Menu.
-Press the Omni Selector to select the item to be set. The following items can be set:
-Beep (ON [Default]/OFF)
-LCD Brightness (Bright/Normal [Default])
-Shutter Sound (in shooting) (2 [Default]/0-5)
Playback Vol. (in playback) (3 [Default]/0-5)
-Auto Power Down (ON [Default]/OFF)
-Date/Time (set the date and time/Style)
-Format (CF)
-Language (English/Deutsch/Francais/Espanol/Japanese [NTSC version])
(English/Deutsch/Francais/Nederlands/Dansk/Suomi/Itliano/Norsk/Svenska/ Espanol [PAL version])
-Video System (NTSC/PAL)