Service manual

R63

Personal Computer

USB

INTERFACE CABLE

IFC-200PCU

DIGITAL

Compact Power Adapter

CA-560

CAMERA BODY

3-3-3 Preparation

Before starting up the Adjustment Software, follow the preparatory steps below:

Obtain all the tools necessary for the adjustment.

For the LCD Adjustment, jot down the numeric value written on the data-sheet of LCD PCB

ASS’You will need it later.

For the “Language Setting”, jot down the setting of the language and the video output type.

You will need it later.

(Refer to 3-5-6.Language setting)

Connect the Camera to the Power Source with the Compact Power Adapter CA-560.

Connect the Camera’s Digital terminal to the PC’s USB Port with INTERFACE CABLE IFC-

200 PCU.

Set the camera to the “PC” mode.

Note: Perform the preparation in the following order otherwise the camera won’t work properly.