Service manual

R60
3 3
3 3
3
AdjustmentsAdjustments
AdjustmentsAdjustments
Adjustments
3-1 Replacement Parts and Adjustment Items
PowerShot G1 requires electrical adjustments when certain parts are replaced.
The table below indicates the adjustments required for the respective part replacements.
For all other parts not listed below, no electrical adjustments are necessary after replacement.
: Adjustment is necessary after replacement.
: Adjustment is necessary after replacement.
(Adjustment is not necessary, only if the adjustment data has been saved and then trans-
ferred after the part is replaced.)
Blank : Adjustment is unnecessary.
* When OPTICAL UNIT is replaced, adjust certainly at the procedure as below.
#1. CCD Adjustment
↓
#2. Optical Unit Adjustment
↓
#3. Imaging Process Adjustment
↓
#4. Flash Adjustment
BATTERY BOX UNIT
OPTICAL UNIT
FLASH UNIT
MAIN PCB ASSY
LCD PCB ASSY
LCD PANEL
BACK LIGHT UNIT
CCD
Adjustment
#1
Optical
Unit
Adjustment
#2
Imaging
Process
Adjustment
#3
LCD
Adjustment
Flash
Adjustment
#4
Adjustment Items
Replacement Part