User`s guide

Configuring the Device Function Settings
2-51
2
Getting Started
Configuring the Device Function Settings
If you cannot set up the printer configuration automatically (see "Setting Up the Printer
Configuration," on p. 2-46), you need to specify the device functions manually.
Configuring the Controller Version
NOTE
For the iR C2620, iR C3200, iR C3200-C1, iR C3220, iR C2570, iR 2570C, iR C3100, iR 3100C, iR
C3170, iR 3170C, iR C5800, iR 5800C, iR C6800, iR 6800C, iR105, iR105-M1, iR105-M2, iR105+,
iR2230, iR2830, iR2870/2270, iR3300/2800/2200, iR3300i/2200i, iR3530, iR4570/3570, iR6000i/5000i,
iR7105/7095/7086, iR7105/7095/7086-S1, iR7200, iR7200-M1, iR7200-M2, iR8070, iR85, iR85-M1,
iR85-M2, iR85+, iR8500, iR8500-M1, iR8500-M2, and iR9070, the available functions vary depending
on the version of the controller for your printer. The controller version must be configured in order to use
the supported functions.
1 Print the Configuration Page.
❑
On the printer control panel, press .
❑ Press [Report Settings] ➞ [Printer] under <Print List>.
❑ Press [PCL] ➞ [Configuration Page] ➞ [Yes].
NOTE
• The procedure of printing the Configuration Page differs depending on the model of the printer
you are using.
• The Controller Function ID and Function Version may not print out depending on the model of the
printer you are using.
2 Confirm the Controller Function ID and Function Version printed on
the Configuration Page.