User`s guide

Installing the Software

2-13

Getting Started

Click [Restart] or [Exit] to finish the installation.

The printer icon is displayed in the [Printers] folder. The driver is now installed.

Dynamic Installation

If you are using a printer connected to a network using TCP/IP protocol, you can automatically

search for its printer port. To install the printer driver by dynamic installation, follow the

procedure below.

IMPORTANT

You can search only for printers in the same subnet as your computer.

NOTE

If you are using a local printer or a printer connected to a network using a protocol other than TCP/IP,

see "Standard Installation," on p. 2-3.

Insert the Software CD-ROM into the CD-ROM drive ➞ wait for the

installation process to start.

If nothing happens, double-click the [My Computer] icon ➞ the CD-ROM drive icon ➞ the

[Minst.exe] icon to start the installation process.

If you cannot find the [Minst.exe] icon on your CD-ROM, follow the steps below.

1. Double-click the following folders: [PCL] ➞ [uk_eng].

2. Double-click the [Setup.exe] icon to start the installation process ➞ proceed to step 4.

NOTE

Depending on the software or the operating system you are using, a screen for selecting the

language to be used for the installer may be displayed before installing.