User`s guide

Specifying the Finishing Options

3-24

Basic Print Options

Click [Booklet].

The [Detailed Settings for Booklet] dialog box opens.

Specify the detailed settings ➞ click [OK].

Click [OK] in the [Finishing] sheet.

NOTE

You can use different paper for the cover page of the booklet. Select [Different for Cover and

Others] under [Paper Selection] in the [Paper Source] sheet

➞

specify the paper source for the

cover page and body pages of the document. (See "Printing the Cover and Body Pages of a

Booklet from Different Paper Sources," on p. 3-36.)

Using Creep Correction for Booklet Printing

You can set Creep Correction when booklet printing. Creep Correction is used to adjust the

margins so that the printing position displacement of the outer and inner pages due to the

thickness of the bound sheets does not occur. This ensures that the margins on all pages are in

alignment after the page edges are cut by the trimmer.

NOTE

This option is available for the imagePRESS C1, iR C2880, iR C2880-J1, iR C3380, iR C3380-J1,

CLC4040, iR C4080, iR C4080-H1, iR C4580, iR C4580-H1, CLC5151, iR C5180, iR C5180-H1,

iR7086-7105, and iR7086-7105-S1.