Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 261
SELECT:CH2 ON
turns the channel 2 display on and selects channel 2.
SELECT:REF1?
might return REF1 1 indicating that the REF1 waveform is being displayed.
SET? (Query Only)
Returns a string listing the oscilloscope settings, except for configuration
information for the calibration values. You can use this string to return the
oscilloscope to the state it was in when you made the SET? query. This
command is identical to the *LRN? command.
Miscellaneous
SET?
NOTE. The SET? query always returns a string with command headers,
regardless of the setting of the HEADer command. This is because the returned
string is intended to be able to be sent back to the oscilloscope as a command
string. The VERBose command can still be used to specify whether the returned
headers should be abbreviated or full length.
SET?
a partial return string may look like this:
:HEADER 1;:VERBOSE 1;:ALIAS:STATE 1;:ACQUIRE:MODE
SAMPLE;NUMAVG 16;NUMENV 16;STATE 1;STOPAFTER
RUNSTOP;:DISPLAY:COLOR:PALETTE:REGULAR NORMAL;:DISPLAY:STYLE:DOT-
SONLY 0;:DISPLAY:PERSISTENCE 0.0E0;CLOCK 0;GRATICULE
FULL;INTENSITY:WAVEFORM 65;BACKLIGHT HIGH;:DISPLAY:XY:MODE
OFF;YCHANNEL CH2;YREF OFF;:SELECT:CH1 0;CH2 1;CH3 0;CH4 0;MATH
0;REF1 0;REF2 0;REF3 0;REF4 0;CONTROL CH2;:HARDCOPY:FORMAT
PCXCOLOR;PORT FILE;LAYOUT LANDSCAPE;:HORIZONTAL:RESOLUTION
LOW;TRIGGER:POSITION 1.02E1;:HORIZONTAL:MAIN:SCALE
2.0E-4;:HORIZONTAL:DELAY:STATE 0;
HEADer, *LRN?, VERBose
Examples
Group
Syntax
Examples
Related Commands