Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 223
MEASUREMENT:MEAS1:STATE ON
turns measurement defined as MEAS1 on.
MEASUREMENT:MEAS4:STATE?
returns either 0 or 1, indicating the state of MEAS4.
MEASUrement:MEAS<x>:STDdev? (Query Only)
(Requires TDSAAM)
Returns the standard deviation of values accumulated for this measurement since
the last statistical reset.
Measurement
MEASUrement:MEAS<x>:STDdev?
<NR3>
MEASUREMENT:MEAS1:STDDEV?
might return: :MEASU:MEAS1:STD 21.0E-12
MEASUrement:MEAS<x>:TYPe
Sets or returns the measurement type for the measurement specified by
MEAS<x>. This is equivalent to selecting the measurement in the Select
Measurement side menu. To see the measurement value on the display the
MEASUrement STATE must be set to ON.
Measurement
MEASUrement:IMMed:TYPe { AMPlitude | AREa | BURst | CARea |
CMEan | CRMs | DELAY | FALL | FREQuency | HIGH | LOW | MAXimum |
MEAN | MINImum | NDUty | NOVershoot | NWIdth | PDUty | PERIod |
PHASE | PK2pk | POVershoot | PWIdth | RISe | RMS
MEASUrement:MEAS<x>:TYPe?
Information on how measurements are derived:.
AMPlitude is the high value minus the low value.
Examples
Group
Syntax
Returns
Examples
Group
Syntax
Arguments