User Guide
Table Of Contents
- Chp.1: Safety Precautions
- Chp.2: Parts and Functions of the Printer
- Chp.3: Notes on Handling the USB Interface
- Chp.4: Printing Your Document
- Chp.5: Loading Paper
- Chp.6: About a Variety of Print Media
- Chp.7: Using the BJ Cartridges and Scanner Cartridge
- Chp.8: Installing the Photo BJ Cartridge
- Chp.9: Replacing the Ink Tanks
- Chp.10: Replacing the BJ Cartridge
- Chp.11: Using the Scanner
- Chp.12: Installing the IS Scan Software
- Chp.13: Routine Maintenance
- Chp.14: Troubleshooting
- Chp.15: Specifications
- User Manual Menu
- Main Menu
■ Print a nozzle check pattern to confirm the success of normal print head cleaning.
(
➡ p.49 or p.50)
If normal print head cleaning does not correct the problem, perform deep print
head cleaning.
➀
Open the Printer Properties dialogue box, then click the
Maintenance tab.
➁ Click the deep print head cleaning icon in the Print
Head Cleaning box.
➂ When a confirmation message appears, click the OK
button.
The POWER lamp starts flashing and print head clean-
ing begins. It takes approximately 1 to 2 minutes until
the POWER lamp stops flashing and the deep print
head cleaning operation is completed.
➀ Select Page Setup from the File menu, then click
the Utilities button.
➁ Select Print head deep cleaning.
Routine Maintenance
53