Fax Machine Users Guide
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
7-9
USING TAM MODE (FAX-B840 only)
7
Remote control features
Use these features when you call home to play back any messages you may have received. You
can also use the remote control features to set TAM MODE.
You must register a four-digit PIN as your password before you can use these features (see
below).
Registering the password for remote control _
1
Press [Function].
Press [Start/Copy].
2
Use [ ] or [ ] to select TAM SETTINGS.
Press [Start/Copy].
3
Use [ ] or [ ] to select PASSWORD.
Press [Start/Copy].
4
Use the numeric buttons to enter a four-digit PIN as your password.
Press [Start/Copy].
5
Press [Stop].
Registration ends and the fax returns to standby mode.
USER SETTINGS
MESSAGE LENGTH
PASSWORD 1234