Fax Machine Users Guide
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
7-3
USING TAM MODE (FAX-B840 only)
7
Setting the recording time for a telephone
message ________________________________________
1
Press [Function].
Press [Start/Copy].
2
Use [ ] or [ ] to select TAM SETTINGS.
Press [Start/Copy] twice.
3
Use [ ] or [ ] to select the recording time.
The recording time can be set to 0, 30, 60 or 120 seconds.
Press [Start/Copy].
4
Press [Stop].
Setting ends and the fax returns to standby mode.
USER SETTINGS
30 SECONDS
When the recording time is set to 0, the alternative outgoing message is played. If an alternative
outgoing message has not been recorded, the outgoing message is played. In this case, there will
be no beep after the message is played and the caller will not be able to leave a message.