Fax Machine Users Guide
Table Of Contents
- Using this guide
- Important safety instructions
- For your safety (Australia only)
- Caution (New Zealand only)
- SETTING UP
- PREPARING TO USE YOUR FAX
- Main components of your fax
- Fax controls - the operation panel
- Guidelines for entering numbers, letters, and symbols
- Setting the TEL LINE TYPE
- Dialing through a switchboard (PBX)
- Registering sender information
- Registering one-touch speed dialing numbers and names
- Registering coded speed dialing numbers and names
- Registering UCanTalk voice tags
- DOCUMENTS AND PAPER
- MAKING COPIES
- SENDING DOCUMENTS
- RECEIVING DOCUMENTS
- USING TAM MODE (FAX-B840 only)
- SETTINGS AND ACTIVITY REPORTS
- SOLUTIONS TO COMMON PROBLEMS
- Specifications
- Index
1-9
SETTING UP
1
Installing the BJ cartridge in your fax_________
When a BJ cartridge is not installed in your fax, PUT IN CARTRIDGE is displayed on the LCD.
1
Make sure the fax is plugged in.
2
Load the paper in the multi-purpose tray.
3
Open the printer cover by gently pulling it towards you (see p. 1-2).
4
Raise the cartridge lock lever on the cartridge holder.
5
Remove the BJ cartridge from its package, then remove the orange protective cap a and
tape
b.
Discard the cap and tape. Never attempt to reattach them to the BJ cartridge print head.
1
2