Instruction manual

3
CLICK HERE TO GO THE INDEX
Brother Cartridges
LC01BK, LC01C, LC01M, LC01Y
1. e lling hole is located under the label as shown. Just peel back the label leaving it
still connected to the cartridge, do not remove completely.
2. Use the provided eyelet screw to drill a lling hole on the top of the cartridge(s) into
the lower area.
3. Connect the needle to the syringe and ll with ink..
4. Insert the needle into the lling hole and inject about 10ml of ink.
5. Pull the label back into place and use a piece of tape to hold it in place.
6. Rinse the syringe with water and dry between each color rell or store for future use.
7. Reinsert cartridge back into the printer and run 1 - 3 cleaning cycles as per printer
instructions.
Filling Hole
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.