Instruction manual

60
CLICK HERE TO GO THE INDEX
Pitney Bowes
765-0
1. Locate the lling hole in the center of the rubber plug as shown in
the image below. For Nupost models, this lling hole is covered by a
silver seal. You can poke through the silver seal with the syringe and
needle.
2. Inject approximately 25 ml into the cartridge, being careful not to
overll.
3. Place the cartridge back into the mailing machine and run a test
cycle. Prompt your machine to let it know that you have inserted a
new cartridge.
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.