Instruction manual

ManualsBrandsCanon ManualsComputer equipment7822A001 - i 950 Color Inkjet Printer

CLICK HERE TO GO THE INDEX

Brother Cartridges

LC03BC, LC03MY

e lling hole is the same hole as the hole that connects to the printer.

Note: e cartridge is lined in a delicate Mylar bag and it is very important not to

insert the needle more than 3/4” or it is possible to pierce or tear the Mylar bag. Im

portant: It is very important to turn the cartridge as shown in the pictures. If you

have the cartridge reversed then you will put the wrong color of ink in the wrong ll

hole. Fill the syringe with ink and carefully insert the needle into the lling hole and

slowly inject about 4 ml. of ink into the cartridge.

Hold the cartridge up with the lling hole at the top. Using the syringe, remove any

trapped air in the cartridge by only inserting the tip of the needle and pulling up on

the plunger until all air is removed.

Remove the syringe and rinse with water and dry for future use, or to use with a dier

ent color ink.

5. Reinsert the cartridge and run a priming cycle as per printer instructions.

NOTE: It is not necessary to disassemble the cartridge to rell it and we strongly recom-

mend you do not.

Cyan

Filling Hole

Black

Filling Hole

Yel l ow

Filling Hole

Magenta

Filling Hole

Waste

Ink Port

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.