Instruction manual

ManualsBrandsCanon ManualsComputer equipment7822A001 - i 950 Color Inkjet Printer

CLICK HERE TO GO THE INDEX

Lexmark Cartridges

1380490, 1380491, 1380492, 1380493

e lling hole is the same hole as the hole that connects to the printer.

Note: e cartridge is lined in a delicate Mylar bag and it is very important not

to insert the needle more than 3/4” or it is possible to pierce or tear the Mylar

bag. Fill the syringe with the correct color ink and carefully insert the needle

into the lling hole and slowly inject approximately 90 ml. of ink into the

cartridge.

Hold the cartridge upright with the lling hole at the top. Using the syringe,

remove any trapped air in the cartridge by only inserting the tip of the needle

and pulling up on the plunger until all air is removed.

Remove the syringe and rinse with water and dry for future use, or to use with

a dierent color ink.

Reinsert the cartridge and run a priming cycle as per printer instructions.

Note: Immediately rell any empty cartridges.

NOTE: It is not necessary to disassemble the cartridge to rell it and we strongly

recommend you do not. We have included a picture of the inside of the cartridge

to satisfy your curiosity.

Front of

Cartridge

Filling Hole

Waste

Ink Port

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.