Instruction manual

31
CLICK HERE TO GO THE INDEX
Hewlett Packard Cartridges
51641A, C1823A, C1823D, C1823G, C6625AN,
C6578AN, C6578DN, C3844A, C3845A
1. e small sealed holes on the top are the lling holes. Use a small screwdriver
to push the plastic seals into the cartridge.
2. Connect the needle to the syringe and ll with the color ink you are going to
ll.
3. Insert the needle into the lling hole of the color you are relling, (see diagram
above) and push all the way towards the center of the cartridge. Note: The
cartridge contains a sponge and resistance will be felt.
4. Inject approximately 10 ml of ink, per color, or until ink just begins to bubble
at the top of the lling hole. Note: Remember to reseal the holes when your
done.
5. Clean the syringe with warm water, and dry before relling with another color
or for future use.
Note: Empty cartridges should always be lled immediately.
Cyan
Magenta
Yel l ow
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.