Instruction manual

ManualsBrandsCanon ManualsComputer equipment7822A001 - i 950 Color Inkjet Printer

CLICK HERE TO GO THE INDEX

Epson Cartridges

S020062, S020118, S020122, S020130

e lling hole is the same hole as the hole that connects to the printer.

Note: The cartridge is lined in a delicate Mylar bag and it is very important

not to insert the needle more than 3/4” or it is possible to pierce or tear the

Mylar bag. Fill the syringe with the correct color ink and carefully insert

the needle into the lling hole and slowly inject approximately 90 ml. of ink

into the cartridge.

Hold the cartridge upright with the lling hole at the top. Using the syringe,

remove any trapped air in the cartridge by only inserting the tip of the needle

and pulling up on the plunger until all air is removed.

Remove the syringe and rinse with water and dry for future use, or to use with

a dierent color ink.

Reinsert the cartridge and run a priming cycle as per printer instructions.

Note: Immediately rell any empty cartridges.

NOTE: It is not necessary to disassemble the cartridge to rell it and we strongly

recommend you do not. We have included a picture of the inside of the cartridge

to satisfy your curiosity.

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.