Instruction manual

22
CLICK HERE TO GO THE INDEX
Digital Cartridges
LJ50X-AB, LJ50X-AK, LJ50X-AC
Color Cartridge
1. e lling holes are located under the cap. e cap is easily removed by simply
pulling it o with your ngers. Be careful not to damage the sensors on the
back
2. Connect the needle to the syringe and ll with ink.
3. Insert the needle into the lling hole of the color to be relled, pushing it down
into the cartridge. Note: You may feel a slight pressure because the cartridge
contains a sponge.
4. Inject about 8 ml. of ink, per color, or until the ink bubbles at the lling hole.
Black Cartridge
1. e actual cartridge is located inside a plastic shell. To remove it pry the lock-
ing tab out and pull the cartridge out of the plastic shell. Important: All of
the parts in the cartridge are very sensitive and delicate and should not be
touched. They can be damaged easily.
2. Using a screwdriver remove the plug (not shown) from the lling hole. (Do
not remove the top).
3. Fill the syringe with ink, insert the lling needle into the lling hole and push
3/4 of the way into the cartridge. Inject about 15 ml. of ink or until the ink
tank is full.
4. Slide the cartridge back into the plastic shell and reinsert into the printer.
Yel l ow
Cyan
Magenta
Black
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.