Instruction manual

17
CLICK HERE TO GO THE INDEX
Canon Cartridges
BC-22e
1. Use the eyelet screw to remove the plugs located on top of the cartridge.
2. Connect the needle to the syringe and ll with ink.
3. Insert the syringe through the lling hole and push into the cartridge. Note:
You may feel a slight pressure because the cartridge contains a sponge.
4. Inject up to 10 ml. of ink, per color, then reseal the cartridge with the plug that
was removed from step 1.
5. Rinse the syringe with water and dry for future use, or use with a dierent
color ink.
6. Reinsert the cartridge(s) and run a priming cycle as per printer instructions.
Note: Immediately rell any empty cartridges.
Magenta
Yel l ow
Cyan
Black
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.