Instruction manual

ManualsBrandsCanon ManualsComputer equipment7822A001 - i 950 Color Inkjet Printer

CLICK HERE TO GO THE INDEX

BCI-15B / BCI-16C

1. Put the cartridges on some paper towels in an area where you can toler-

ate a spill.

2. Turn the cartridge up side down so that the outlet port of the cartridge is

facing upward.

3. Fill the syringe with 3ml of ink for the color being relled.

4. Drip ink onto the felt pad in the outlet port. The felt pad will quickly

absorb the ink into the cartridge. If the felt pad will not soak up any

more ink and the ink just sits on top then that chamber is full. Dab a pa-

per towel onto the felt pad to soak up any ink that did not get absorbed

into the cartridge.

5. Please be sure that you put the correct color into the correct chamber

otherwise you will color contaminate. Contaminating another color is

not reversable, and may require you to start over with a new cartridge.

Note: Do not pierce the felt pad with the needle of the syringe.

6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer in-

structions.

Canon Cartridges

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.