Instruction manual
12
CLICK HERE TO GO THE INDEX
Canon Cartridges
BC-01, BC-02, BC-05, BX-02, BX-03,
1.
Use the eyelet screw to remove plug located on the top side of the cartridge.
FOR BX-03 ONLY: A hole must be made on the top of the cartridge by us-
ing the hole making tool included in the kit. . Firmly hold the handle of the
tool and begin twisting the tool into the top corner of the cartridge. Continue
twisting until it pierces the plastic cover. Once the plastic to is pierced, making
the rest of the hole will go very quickly.
2.
Connect the needle to the syringe and ll with ink.
3.
Insert the syringe through the lling hole and push into the cartridge. Note:
You may feel a slight pressure because the cartridge contains a sponge.
4.
Inject up to 30 ml. of ink then reseal the cartridge with the plug that was
removed from step 1. FOR BX-03 ONLY: Use the plug provided in the kit to
seal the cartridge.
5.
Rinse the syringe with water and dry for future use, or use with a dierent
color ink.
6.
Reinsert the cartridge(s) and run a priming cycle as per printer instructions.
Note: Immediately rell any empty cartridges.
Black
Filling Hole
Printer Head
Printer Head
Cyan
Filling Hole
Magenta
Filling Hole
Yellow
Filling Hole
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.